Tools for the building, to rough-cast, paint and coat

The moustic - The Stucco - Spraying Machine - Compressors - HVLP Spray Gun - Turbines
THE SPRAYING MACHINES FOR THE READY TO USE COATINGS For the painter and decorator
I Wath is used for ? I Which products ? I Equipments I Advantages I Description

For what is used a spraying machine?
A spraying machine consists of a tubular frame on wheels on which is assembled a casing hopper stainless, been driven by an electric motor coupled to a reducer actuating a volumetric screw pump. The machine is managed by an electronic box dismountable (norm IP65). Used with a compressor of air and thanks to a nozzle, developed by our engineering and design department, ourspraying machine allow the projection of coatings using the air (the mixture is done on the level of the nozzle). All our machines are delivered with 5 tips of different diameter for a more precise work. The process is simple but clever: the product arrives at the center of the tube and is found atomized in the form of droplets thanks to the air pockets located inside this one (tube with internal mixture).

Areas of use the spraying machines ?
Spraying of finishing mortar (RPE "thick plastic coating" type with a max. grain size of 5 mm) : - Mineral based rendering - Synthetic resin and silicone rendering - Silicate rendering Smooth and rough - Smooth layer coatings - Paper pulp Sealants for buildings - Thick layer coatings - Aqueous bitumen emulsions - Mineral based sealants Composite thermal insulation systems - Application of thermal insulation glues on panels and fixing of reinforcement fabric	Concrete restoration - Fine mastics - Cement suspensions - Cement glues Miscellaneous uses - Spray painting using a spray gun - Plastering with roller or trowel - Concrete sealant - Sound absorbing plasters - Primary coatings for concrete - Fire mortar with fireproof coating for firewalls - Pointing of stone walls New : coatings of frontage Only with T2060 - projection of the pumpable coatings of type: Weber and Broutin, PRB, Parex, Cantillana... to carry out all work of frontage with the hydraulic kit of projection.

Which equipment is provided with each spraying machine ?
Standard equipment provides : 1x10 m product hose (diam. 25 mm), 1x10 m air hose (diam. 10 mm) fitted with quick connects 1 accessories case containing : - 1 monoblock projection hose nozzle, - 5 tips of differetn diameters, - 2 foam rubber balls for product hose cleaning, - 1 bit to clear the nozzle and 1 brush. 1 instructions guide

	T 1545 - Ref. 15450000-1
Click to enlarge For the painter and decorator To be used only with coating packaged in bags and ready to use. These products must be pasty of fibrous coats, decorative facing (for outside or interior decoration) rendering with lime, thick plastic coat and light coat products. It’s possible to produce coating from drops and also roughcast	Technical specifications : Engine Power : 1,5 Kw (2 HP) Output 0 to 15 L/ min Granulation max: 4 mm Maximum length : 20 m Max operating height : 15 m Tank capacity : 3 bags - 45 litres Projection hose nozzle : synthetic product Nozzles : 3, 4, 5 and 6 mm Electricity supply : 230 V / 50 Hz / 16 Amp. Running with an air compressor with a minimum flow of 15 m3 with 4 bar Dimension in cm ( L x W x h) 111 x 51 x 83,5 Weight : 65 kg Standard equipment : - 1 product hose (diam 25), 1 air hose (diam 10) of 10 m length equipped with quick joints. - 1 accessories case containing : ¤ 1 ergonomic projection hose nozzle ¤ 5 nozzles of different diameter ¤ 2 foam rubber balls for hose cleaning ¤ 1 brush to unblock the nozzle